Appliance Repair Bondurant Iowa

Hometown Hero Appliance Repair Rated 5.0 out of 5 stars based on 19 customer reviews

We serviced a
GE WASHER
Model PTW705BPT0DG
Near Bondurant, Iowa 50035
Mike
Job Details: 05/06/2026
The washer wouldn't start a cycle and had a broken lid. We diagnosed a failed main control board and installed a replacement unit. The washer now runs properly, though the customer may need to apply slight downward pressure on the lid until it locks due to the lid damage. Job complete. Technician hooked up diagnostics and confirmed an inverter board fault with no lid lock activation. Main control board assembly was replaced, model ID was set, and unit was tested and verified functional.
We serviced a
WHIRLPOOL WASHER
Model WTW5100HW1
Near Bondurant, Iowa 50035
Mike
Job Details: 05/06/2026
The customer reported the washer was leaking and making a unusual noise during the start cycle. We tested the drain pump and found it functioning properly. We also identified a crack in the inlet valve assembly as the source of the leak, and replaced the valve to stop the water from escaping. Job complete. Technician tested drain pump operation and inspected inlet valve assembly under pressure. Found hairline crack in valve body upstream of solenoid coils; replaced valve component to restore watertight seal.
We serviced a
WHIRLPOOL WASHER
Model WTW5100HW1
Near Bondurant, Iowa 50035
Mike
Job Details: 05/01/2026
The customer reported water leaking from the washer, which she discovered after the unit had been idle for several days. We inspected the hot water supply hose and confirmed it was the source of the leak. We replaced both the hot and cold water supply hoses to resolve the issue. Job complete. Technician inspected the hot water inlet hose and identified it as the leak source. Both water supply hoses were replaced with new units to prevent future leaks and ensure proper water delivery to the appliance.
We serviced a
WHIRLPOOL DRYER
Model WED51008W1
Near Bondurant, Iowa 50035
Mike
Job Details: 05/01/2026
The customer's dryer had a loose power cord without proper strain relief, and the venting system had accumulated buildup that needed cleaning. We secured the power cord connection, inspected the venting system thoroughly, and cleaned out the accumulated debris to restore proper airflow. Job complete. Technician inspected the power cord connection and identified missing strain relief. Examined the dryer venting system and found buildup restricting airflow; cleaned the venting to restore proper ventilation performance.
We serviced a
HOTPOINT WASHER
Model HTW240ASK5WS
Near Bondurant, Iowa 50035
Anthony
Job Details: 04/15/2026
The customer reported that their Hotpoint washer was no longer spinning or agitating. We found the drive belt had slipped off the pulley and was damaged, so we replaced it to restore normal operation. Job complete. Technician inspected the drive belt and pulley assembly, confirmed the belt had separated and sustained damage, and installed a replacement drive belt to restore agitation and spin cycle function.
Rhonda Anderson
Bondurant, Iowa
ICE-O-MATIC ICEMAKERS U/C(H)
NONE
Excellent Service and very knowledgeable. Thank you so much for all your help.
02/27/2026
Deb Nelson
Bondurant, Iowa
GE RANGE ELEC
JB645RK8SS
01/28/2026
No name
Bondurant, Iowa
SAMSUNG REFRIGERATOR
RF28R7201SRAA
Mike was knowledgeable, respectful and answered all of my questions.
10/26/2025
Heather C
Bondurant, Iowa
WHIRLPOOL REFRIGERATOR
WRF757SDHZ03
Rory was professional, friendly, and efficient. He explained what was going on with our fridge and gave us options available to fix it.
09/08/2025
Debby
Bondurant, Iowa
AMANA WASHER
NTW4516FW4
Very knowledge and helpful!
04/01/2025