Appliance Repair Grimes Iowa

Hometown Hero Appliance Repair Rated 4.9 out of 5 stars based on 59 customer reviews

We serviced a
SAMSUNG DRYER
Model DV42H5200EP/A3
Near Grimes, Iowa 50111
Nick
Job Details: 04/17/2026
The customer's Samsung dryer wasn't heating. We replaced the thermal cutoff (TCO) and the heating element, restoring proper heat function to the dryer. Job complete. Technician tested heating element continuity and thermal cutoff operation. Replaced WP35001193 TCO and WP35001247 heating element. Vent cleaning was recommended as preventive maintenance.
We serviced a
GE DRYER
Model PTD70EBPT0DG
Near Grimes, Iowa 50111
Rory
Job Details: 04/16/2026
The customer's dryer wasn't spinning properly. We found that the idler pulley had failed and replaced it to restore normal operation. Job complete. Technician inspected the drum rotation and idler pulley assembly, confirmed pulley failure, and completed replacement of the idler pulley component.
We serviced a
FRIGIDAIRE REFRIGERATOR
Model FGHB2866PF0
Near Grimes, Iowa 50111
Anthony
Job Details: 04/15/2026
The ice maker wasn't producing ice after the mold thermistor became dislodged from the twist tray. We replaced the ice maker assembly to restore full ice production. Job complete. Technician diagnosed a failed mold thermistor on the twist tray causing the harvesting cycle to malfunction. Ice maker assembly was replaced to resolve the issue.
We serviced a
GE WASHER
Model GFW650SPN0SN
Near Grimes, Iowa 50111
Mike
Job Details: 04/13/2026
The customer reported that the washer starts a cycle but doesn't actually wash. We connected the unit to our diagnostic equipment and found a faulty main control board causing an accelerometer fault. After testing the door lock and drain pump to rule out other issues, we confirmed the control board was the problem and completed the repair. Job complete. Technician connected unit to diagnostic software and identified accelerometer fault code. Spin test showed no response from drum motor. Door lock and drain pump responded normally in load control test, isolating the failure to the main control board.
We serviced a
GE PROFILE DISHWASHER
Model GDT605PMM5ES
Near Grimes, Iowa 50111
Rory
Job Details: 04/10/2026
The customer's GE Profile dishwasher wasn't filling properly. We diagnosed a faulty water pressure sensor and replaced it to restore normal operation. Job complete. Technician tested water inlet flow and pressure sensor continuity, confirmed the WD21X25468 pressure sensor was defective, and installed the replacement unit from stock.
Ryan Roberts
Grimes, Iowa
GE WASHER
GFW850SPN2RS
Nick was very polite and informative. He seems to care about the customers opinion and what’s best for them as well. I would highly recommend him as a service professional anytime.
04/11/2026
The Taylor
Grimes, Iowa
LG REFRIGERATOR
LFXS24566S
Chuck was amazing. We appreciated his professionalism and how knowledgeable he was. He was honest and fair, and went above and beyond. We will recommend to family and friends.
03/01/2026
Juliet
Grimes, Iowa
SAMSUNG WASHER
WF53BB8900ATUS
Nick was personable and knowledgeable. He was great to work with, and our washer is working great.
01/30/2026
Greg
Grimes, Iowa
WOLF (H) COOKTOP ELEC
CI365CB
Scheduling was very easy and efficient. The work done was quality work and done well. Mike was very professional and friendly and did a great job with the work needed to complete the job. I would recommend them to anyone needing their services.
12/23/2025
Corey
Grimes, Iowa
WHIRLPOOL MICROWAVE OVEN
WMH31017AS1
Was very thorough. Did the job quick.
11/11/2025