Appliance Repair Council Bluffs Iowa

Hometown Hero Appliance Repair Rated 4.8 out of 5 stars based on 241 customer reviews

We serviced a
KENMORE WASHER
Model 110.20094993
Near Council Bluffs, IA 51503
Lucas
Job Details: 09/05/2024
"Customer states washer will not drain. Drained water out of unit with shop vac. Removed hoses to drain pu,p to check for blockage. Impeller spins freely. Checked hoses further down the line for debris. Pulled out a piece of plastic from one hose. Noticed unit has a drain recirculating solenoid. Solenoid is not opening to allow water to drain. Verified solenoid is receiving 120v. Unit will need a new drain solenoid. ; dspstn on spec-tagged invntry: 1 WP3363394 PUMP WPL/KEN DIR DRV and 1 WP8054980 SWITCH-LID"
We serviced a
SAMSUNG REFRIGERATOR
Model RFG237AABP
Near Council Bluffs, IA 51503
Lucas
Job Details: 09/05/2024
"Customer states freezer isnt cooling properly. Frost forming on food. Temp is 12-25 degrees in freezer. 37 degrees in fresh food section. No ice build up on either evaporators. No clogged drains. All fans and compressor are running. Checked for error codes, none present. Door seals are good. Pulled panel off of back and condenser coil is very dirty. Unit will need a condenser cleaning."
We serviced a
THERMADOR (H) RANGE PRO (H)
Model PCG486GD/05
Near Council Bluffs, IA 51503
Mark F
Job Details: 09/05/2024
Customer states front left and rear left burners do not ignite following an electrical surge. Verified complaint. Removed cook top. Verified proper 120v coming into unit. Received 0v at FL & FR spark module. Traced voltage back to burner control board. Can see significant smoldering off of relay on board. Would need new burner control board replaced.; ordrng 1 00619016 (CONTROLLER - SIMMER)
We serviced a
MAYTAG DRYER
Model MEDC500VW0
Near Council Bluffs, IA 51503
Austin
Job Details: 09/05/2024
Customer states not heating. Replaced heating element.
We serviced a
SPEED QUEEN WASHER
Model LFNE5BSP115TW01
Near Council Bluffs, IA 51501
Mark F
Job Details: 09/04/2024
"Customer states unit wobbles when in spin. Found unit unleveled from front right leg with locking nut disengaged, as well as front internal shipping bracket still intact. Leveled unit and removed front shipping bracket. Unit spins properly. Would recommend installing rubber footing being unit is on concrete."
LB
Council Bluffs, Iowa
08/23/2024
Jacob was very courteous and proficient. Unfortunately his visit was very short and it was not as serious issue like I thought with my appliance he came to repair. But he was great none the less. Very professional!
Overall Experience
Council Bluffs, Iowa
08/21/2024
Overall Experience
Council Bluffs, Iowa
08/16/2024
Overall Experience
CRM
Council Bluffs, Iowa
08/09/2024
Very professional, knowledgeable and efficient
Overall Experience
Council Bluffs, Iowa
08/09/2024
Overall Experience