Appliance Repair Rhodes Iowa

Hometown Hero Appliance Repair Rated out of 5 stars based on customer reviews

We serviced a
SAMSUNG REFRIGERATOR
Model RFG295AARS
Near Rhodes, IA 50234
David M.
Job Details: 04/30/2024
Unit was currently at 3 degrees in freezer and fridge was 36. Condenser was decently dusty, and also had low air flow behind the machine. Machine had no error codes. Adjusted defrost to 8 hour defrost.; dspstn on spec-tagged invntry: 1 DA81-06006A UV DRIER - STEP VALVE
We serviced a
SAMSUNG REFRIGERATOR
Model RFG295AARS
Near Rhodes, IA 50234
David M.
Job Details: 04/30/2024
Unit was currently at 3 degrees in freezer and fridge was 36. Condenser was decently dusty, and also had low air flow behind the machine. Machine had no error codes. Adjusted defrost to 8 hour defrost.; dspstn on spec-tagged invntry: 1 DA81-06006A UV DRIER - STEP VALVE
We serviced a
VIKING OVENS GAS
Model VGIC365-6BSS
Near Rhodes, IA 50234
Mike
Job Details: 03/21/2024
Installed new bake burners, and igniters, door hinges, front left burner valve. Oven is now lighting in the proper time and both burners,door opens properly, and front left burner is now functioning. Job complete.
We serviced a
VIKING OVENS GAS
Model VGIC365-6BSS
Near Rhodes, IA 50234
Mike
Job Details: 03/08/2024
Unit is not heating properly, left front burner valve will, not turn, and door not opening or closing properly. Tested oven and left igniter is pulling 2.9 amps and will eventually light after a few minutes, right is pulling 2.8 and never lights. Should pull 3.3-3.5 to properly work. Will need new igniters and burner tubes s they are corroded as well. Door hinges are worn and will need replaced. Left front burner valve u stuck and will need replaced also.
We serviced a
VIKING OVENS GAS
Model VGIC365-6BSS
Near Rhodes, IA 50234
Mike
Job Details: 03/08/2024
Unit is not heating properly, left front burner valve will, not turn, and door not opening or closing properly. Tested oven and left igniter is pulling 2.9 amps and will eventually light after a few minutes, right is pulling 2.8 and never lights. Should pull 3.3-3.5 to properly work. Will need new igniters and burner tubes s they are corroded as well. Door hinges are worn and will need replaced. Left front burner valve u stuck and will need replaced also.