Menu  

Appliance Repair Collins Iowa

Hometown Hero Appliance Repair Rated out of 5 stars based on customer reviews

We serviced a
FRIGIDAIRE DISHWASHER
Model FFBD2406NW7B
Near Collins, IA 50055
Dillon
Job Details: 09/20/2023
"Customer stated that the machine is non-operational of the display does work. I found the reason this is happening is because the control board is never sending voltage to any of the parts down below the machine, found that the main control board is bad, I then quoted customer to replace. Job denied , job complete."
We serviced a
SAMSUNG REFRIGERATOR
Model RF28R7351SG/AA
Near Collins, IA 50055
Dillon
Job Details: 07/21/2022
Return the door. Found that after I swapped the door that the machine is operating properly and there are no more scratches or dents. Job complete.
We serviced a
SAMSUNG REFRIGERATOR
Model RF28R7351SG/AA
Near Collins, IA 50055
Dillon
Job Details: 07/13/2022
Customer complaint that two doors had dents on them. And then swapped out the right hand door and found that it was not the freezer door that had the dance it was the middle drawer. Will return with door. ; ordrng 1 Da91-04926k (Door middle dsm) and 1 Da91-04926k (Door dsm)
We serviced a
SAMSUNG REFRIGERATOR
Model RF26HFENDWW/AA
Near Collins, IA 50055
Mike
Job Details: 06/06/2022
"Unit has refrigerant leak and fluid in freezer evaporator. Needs compressor fresh food evaporator freezer evaporator, and filter dryer to repair."
We serviced a
SAMSUNG WASHER
Model WF42H5200AW/A2
Near Collins, IA 50055
Dillon
Job Details: 04/28/2022
"Customer complaint is at the unit would not spin but it was doing everything else properly. Found that when we showed up and ran a diagnostic cycle the unit leaked water immediately. Found that the water was coming from the drain pump housing. Told customer she would need a new drain housing. We then found that when we put the unit into a spin cycle the unit would attempt to agitate but not agitate well at all. And found that it would not spin at all either. I found that there was an AE6 error code and a 3e error stored in the machine. Found that the unit would need a new main board and inverter board, found that they were discontinued boards but that we could get them refurbished. I then called customer to do the repair, job denied. Job complete. ; dspstn on spec-tagged invntry: 1 DC64-00519B LATCH WP8182634"