Menu  

Appliance Repair Weston Nebraska

Hometown Hero Appliance Repair Rated out of 5 stars based on customer reviews

We serviced a
SAMSUNG DISHWASHER
Model DW80R7061UG
Near Weston, NE 68070
Ali
Job Details: 02/14/2024
During inspection the unit would not fill with water. Gained access to the door harness and noticed it had a break in it. Rewired the harness and reassembled the unit. Unit is now operating properly. Ali! Please vote for us for Lincoln Choice Awards! https://journalstar.com/contests/lincolns-choice-awards/
We serviced a
SAMSUNG MICROWAVE OVEN
Model ME21M706BAG
Near Weston, NE 68070
Ali
Job Details: 01/03/2024
During inspection I gained access to the door switches and confirmed they were working properly. I noticed the latch assembly wasnt aligned properly. Fixed the latch assembly and reassembled the unit. Ran a test utilizing my magnetron jig. Finally I ran a cup of water for 2 minutes. Unit is now operating properly. Ali! ; dspstn on spec-tagged invntry: 1 OM75P-21-ESGN MAG-OEM
We serviced a
SAMSUNG WASHER
Model WF45H6300AG/A2
Near Weston, NE 68070
Ali
Job Details: 11/24/2023
During inspection unit would not drain properly. Unit had a bad drain pump assembly. Removed the old pump assembly and installed the new assembly. Confirmed there was no leaks. Unit is now operating properly. Ali! ; dspstn on spec-tagged invntry: 1 DC31-00187A DRAIN PUMP
We serviced a
GE CAFE DISHWASHER
Model CDT845P3N8D1
Near Weston, NE 68070
Kevin
Job Details: 05/25/2023
Installed parts per Ali. Unit working. Seen no high garbage loop edu customer on that. And dishwasher and microwave breakers mis marked. Microwave breaker shuts dishwasher off. Edu customer.
We serviced a
GE CAFE DISHWASHER
Model CDT845P3N8D1
Near Weston, NE 68070
Ali
Job Details: 04/28/2023
During inspection I ran the unit in a diagnostic mode and noticed it was displaying a dc voltage contact error. Checked all of the dc loads and they were working properly. I noticed some wires were pinched between the main pcb. Customer stated unit would not go past 37 minutes. Allowed the unit to ran and it went past 37. I did noticed unit would power on and off on its own during the idle stage. Going to order a new main control board and ui. Ali! ; ordrng 1 WD01X29878 (Door latch) and 1 WD21X31698 (Ui) and 1 WD21X32078 (Ui harness) and 1 WD21X32058 (Main pcb) and 1 WD21X31502 (Dc harness)