Appliance Repair Spring Hill Iowa

Hometown Hero Appliance Repair Rated out of 5 stars based on customer reviews

We serviced a
GE DRYER
Model GTD84ECPN1DG
Near Spring Hill, IA 50125
Alex
Job Details: 04/28/2023
Return with parts. Replaced main board and tested unit with same thing happening of unit stopping mid cycle. Contacted tech line and checked power. Getting 120 to motor and voltage is not dropping even though new motor has stopped. Ran unit and and unit is not dropping voltage at any point. Tech line gave me a case number #10037684
We serviced a
GE DRYER
Model GTD84ECPN1DG
Near Spring Hill, IA 50125
Alex
Job Details: 04/28/2023
Return with parts. Replaced main board and tested unit with same thing happening of unit stopping mid cycle. Contacted tech line and checked power. Getting 120 to motor and voltage is not dropping even though new motor has stopped. Ran unit and and unit is not dropping voltage at any point. Tech line gave me a case number #10037684
We serviced a
GE DRYER
Model GTD84ECPN1DG
Near Spring Hill, IA 50125
Alex
Job Details: 04/18/2023
Customer compliant is that unit will just click and not stop rotating. Customer also states clothes are not drying. Tested unit with no heating issues found but while running test unit stopped spinning and just started clicking. Tested a few more times with same results. Checked main board and drum is getting 120v but is not rotating. Disassembled unit and found nothing blocking the drum from spinning. Ordering new motor and harness. Will return to complete repair. ; ordrng 1 WE03X29257 (Blower and motor Assy - dsm) and 1 WE03X31620 (Pully - dsm) and 1 WE03X29259 (Belt - dsm) and 1 WE08X29466 (Harness - dsm)
We serviced a
GE DRYER
Model GTD84ECPN1DH
Near Spring Hill, IA 50125
Evan
Job Details: 03/20/2023
Customer complaint is that when using steam cycles unit is leaving puddle of water on floor near front of unit. Found short tubing connecting front panel spray nozzle to main machine tubing had disconnected from nozzle elbow connector. Replaced front nozzle including below and tubing. Unit is now operating properly. Job completed.